EV Charger Installation Burwood Heights
Book Your Local Electrician Now
Need a licensed EV charger installer in Burwood Heights? We install Ocular, EVnex, Zappi and the Tesla Wall Connector, with a switchboard assessment included and a CCEW issued on completion. Fill in the form or call 1800 343 247.
EV charger installation in Burwood Heights
Burwood Heights is a small elevated pocket south of Burwood, and it is one of the more straightforward areas we work in for EV charging.
The housing is predominantly inter-war and post-war brick — detached and semi-detached homes on regular blocks along quiet residential streets, most with a driveway and a good proportion with a garage or carport. The suburb sits on higher ground than the surrounding areas, but the blocks themselves are generally level, so the split-level complications of the river suburbs are absent. Runs are short and the routes are direct.
**Book a free EV charger assessment — we confirm your switchboard, work out the cable route, and give you a fixed written quote before any work begins.**
Property types in Burwood Heights
The suburb is small and largely residential, without the commercial centre or apartment density of neighbouring Burwood, so almost every enquiry here is a conventional house installation.
What varies is the electrical infrastructure. These houses have had sixty to ninety years of progressive electrical work depending on their era, and the outcome differs house to house. Some boards have been steadily modernised and already carry a spare way for a new circuit; others remain sized for the household demands of decades ago.
Burwood Heights sits across a council boundary, but that has no bearing on an EV charger — the work requires a licensed electrician and a CCEW regardless of which side you are on.
Inter-war and post-war brick homes with a driveway and a garage or carport are the Burwood Heights standard and the most straightforward installations here — a short direct route, a defined parking position, and room to work at both ends.
The elevated position does not translate into steep blocks, so the level changes that complicate the river suburbs are largely absent and cable runs stay short.
Where the garage sits at the rear of a deeper block the run is longer, which affects the price rather than the feasibility.
Semi-detached properties occasionally have narrow or shared side access, which can change the practical route, so we walk it on site before quoting. The suburb has very little apartment stock.
Licensed & Fully Insured EV Charger Electricians
EV charger installation is regulated electrical work in NSW. It requires a licensed electrical contractor, a dedicated 32A circuit protected by a Type A RCD, and a Certificate of Compliance for Electrical Work issued on completion. From 1 July 2026 all NSW CCEWs must be lodged digitally through the BCNSW eCert portal, and we are registered to do so.
Installing a charger without a licensed electrician, or on a shared circuit not designed for a sustained 32A load, is illegal and may void both your home insurance and your vehicle warranty.
Upfront Fixed Pricing — No Surprises
Every quote we provide in Burwood Heights is fixed and in writing before a single tool comes out — it covers the charger unit where we supply it, all cable and conduit, the dedicated 32A circuit, the Type A RCD, and any switchboard work required. The figure we quote is the figure you pay.
Upfront pricing, same-day service in most cases, available 24/7 on 1800 343 247, and every installation backed by a lifetime workmanship warranty. Over 90 five-star Google reviews.
EV Charger Installation Services in Burwood Heights
We install the full range of residential, strata and commercial EV charging. A switchboard assessment is included with every quote.
EV Charger Brands We Install
All four major Australian EV charger brands are part of our range. Which suits you comes down to your vehicle, your electrical setup, and your solar — a quick rundown follows, and we will happily match one to your needs.
Ocular
Australian-made, smart, great value
Australian-owned and built for local conditions, with local support. The LTE Plus is our most popular single-phase smart unit: WiFi, Bluetooth, app control, and an IP66 weatherproof rating. The IQ Home Solar model adds solar divert via CT clamp. Universal Type 2 connector fits every EV on Australian roads.
Read moreEVnex
premium NZ build, 4-year warranty
New Zealand-made with a Sydney support team and the market’s longest warranty at four years. The E2 Core, E2 Plus and X22 all include solar smarts as standard, and most carry built-in 4G so they keep working if home WiFi drops. Polestar’s preferred charger; available in four colours.
Read moreTesla Wall Connector
not just for Teslas
Not just for Teslas. The Gen 3 unit charges any EV with a Type 2 connector, does up to 22kW on three-phase, has a 7.3m tethered cable, a four-year warranty, and over-the-air updates. A strong all-rounder.
Read moreZappi by myenergi
the solar-first choice
The solar-first pick. Its CT clamp works with any inverter, with three modes: Fast (grid-supported), Eco (solar-prioritised with grid top-up), and Eco+ (surplus solar only). Available in 7kW single-phase or 22kW three-phase. If you have solar, this is usually our first recommendation.
Read moreFast and Reliable 24/7 Electrical Service You Can Count On!
No hidden costs, ever! Upfront pricing you can trust.
Switchboards in Burwood Heights
Burwood Heights’ inter-war and post-war brick homes carry sixty to ninety years of progressive electrical additions, and the finding varies considerably from one property to the next.
A reasonable proportion have been updated over the decades and already have modern circuit breakers with a genuine spare way for a dedicated 32A circuit, which makes for a quick installation and a simple quote. Others still have boards adequate for much lower household demands, with older-style safety switches and no spare capacity.
Ceramic fuse carriers appear occasionally in the least-altered houses, and those boards need replacing before a charger can safely be added. We check the main switch rating and real spare capacity at the free visit.
Your switchboard is likely ready if it has:
An upgrade is needed if it has:
Charge Your EV From Solar
If your property has solar, a Zappi charger can divert surplus generation to your car instead of exporting it. On a clear Sydney day a 6.6kW system can recover roughly 30-50km of range from surplus solar alone.
We check inverter compatibility, install the CT clamp and commission all three charging modes before we leave.
Apartment & Strata EV Charging in Burwood Heights
For the strata and townhouse properties in Burwood Heights, charging cannot simply be cabled from a unit to a car space — the building’s supply has to be assessed and a shared or sub-metered system designed. We handle that end to end with owners corporations and building managers.
Why Burwood Heights Chooses Focus Group Electrical
We have worked Burwood Heights properties for years and understand what the local homes and boards throw up, so there are fewer surprises on the day.
Nearby Areas We Also Serve
Beyond Burwood Heights, we install EV chargers across the Inner West including Enfield, Burwood, Croydon Park, Strathfield South and Belfield. Call 1800 343 247 to confirm we cover your street.
Why Choose Focus Group Electrical
There are countless reasons home and business owners chooses us and here are a few that truly stand out:
Over 25 Years of Experience
Licensed and Insured
Local and Family-Owned
On-Time & Fully Equipped
No Hidden or Surprise Fees
24/7 Availability
Our Recent EV Charger Installation
Each photo showcases the level of care, expertise, and attention to detail we dedicate to every electrical project we handle. From modern lighting installations to faultless rewiring and safety upgrades, we bring quality craftsmanship and care to every home or business.
Our Trusted Partners
